RMS 1000 watts
Dual 2 or 4-ohm voice coils
Vented magnetic gap
Aluminum 2.75” voice coil former for superior heat dissipation
Innovative high-velocity vented frame spacer ring
Large aluminum Faraday ring for smooth acoustic response
Patented high-strength cast aluminum frame
High-temperature voice coil wire
Spring-loaded terminals
Stitched-on double “XL” tinsel lead wires
This mighty 10-inch was a top-down improvement of its predecessor, which now delivers over 35mm of mechanical excursion. The 2.75” coil punches way above its weight, outperforming most 3” coils without adding weight. The motor also features a large magnet shorting ring (faraday ring) to reduce distortion and deliver smoother response across the entire acoustic spectrum. The motor & coil setup is mated to an extremely robust double-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone and a strong foam surround were used to complete this masterpiece.
Specifications
RE (Ohms) 3.90 6.82
FS (Hz) 37.0810 36.1409
VAS (L) 10.3683 12.3547
Qes 0.3598 0.3744
Qms 3.7041 3.5051
Qts 0.3280 0.3383
Le (mH) 3.5178 4.4560
BL (NA) 28.3634 31.5270
Mms (Grams) 318.8226 281.6632
Cms (uM/N) 57.7815 68.8513
Sens (dB @ 1w/1m) 83.42 83.67
Xmax 19mm 19mm
T/S SPECS SAV2 10″ D2 SAV2 10″ D4
Enclosure Specifications
Sealed Enclosure 0.5 cu ft
Ported Enclosure 1.0 cu ft
Recommended Tuning 35Hz
Recommended Port Area 15 sq in
Displacement
Depth 6.92"
Outside Diameter 10.94″
Cut-Out 9.17″
Additional information
Weight | 28.8 lbs |
---|