Rockford Fosgate Prime R2-1200X1 Monoblock 1200 Watts Amplifier

The Rockford Fosgate R2-1200X1 is a 1 Ohm stable, 1200 Watts monoblock Class D amplifier with C.L.E.A.N. setup technology, variable Punch EQ, and an included remote level control for precise subwoofer tuning.

$449.99

32 in stock

Description

The Amp At A Glance:

  • 1 Ohm stable: Supports mono operation at 4 Ohm, 2 Ohm, or 1 Ohm for flexible subwoofer system design.
  • Substantial monoblock power: Delivers 400 Watts x 1 at 4 Ohm, 800 Watts x 1 at 2 Ohm, or 1200 Watts x 1 at 1 Ohm of RMS continuous power.
  • Efficient Class D operation: Greater than 80 percent average efficiency helps reduce demand on the vehicle’s electrical system.
  • Simplified gain adjustment: C.L.E.A.N. setup circuitry and variable input gain help you configure the amplifier accurately.
  • Flexible bass tuning: A variable infrasonic filter, continuously variable Punch EQ, and fully adjustable 12 dB/octave high- and low-pass Butterworth crossovers provide detailed control.
  • Control from the driver’s seat: The included RLC remote level control lets you adjust subwoofer output to suit the music.
  • Factory or aftermarket integration: High-level input capability, balanced differential inputs, RCA pass-through outputs, and an Auto-Sense bypass switch support a range of system configurations.
  • Power and protection technology: The P.O.W.E.R. Supply generates more power as voltage increases, while rollback, short-circuit, and over-current protection help safeguard operation.

The R2-1200X1 gives a subwoofer system the power and control needed to bring bass forward with authority. Its efficient monoblock design supplies focused low-frequency output without placing unnecessary demand on the vehicle’s electrical system.

C.L.E.A.N. circuitry helps establish proper gain settings, while the infrasonic filter, Butterworth crossovers, and Punch EQ let you shape the bass around the subwoofer, enclosure, and music. The result is a setup that is easier to dial in for clear, controlled low-frequency performance.

Amplifier Specifications
Amp Channels Monoblock
Amp Power 1200 Watts
Amp Class Class D
Amp Stability 1 Ohm Stable
Bridgeable No
Crossover Controls Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz – 40 Hz @ 12dB/Octave Butterworth
Tone Controls 0 to +18 dB @ 45 Hz
Amp Remote Control Included
Rated Power (RMS Continuous Power) 400 Watts x 1 @ 4Ohm
800 Watts x 1 @ 2Ohm
1200 Watts x 1 @ 1Ohm
Dynamic Power (PVC/PowerCube) 489 Watts x 1 @ 4Ohm
889 Watts x 1 @ 2Ohm
1389 Watts x 1 @ 1Ohm
Frequency Response 20 Hz – 250 Hz
Total Harmonic Distortion (THD+Noise) 4Ohm: <1.0%
2Ohm: <1.0%
1Ohm: <1.0%
Input Sensitivity Low-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V
Efficiency (average) > 80%
Electrical & Connections
Power Input Connector Compression Terminal Block
Power Wire Gauge 4 AWG
Speaker Output Connector Compression Terminal Block
Speaker Wire Gauge 8 AWG
Signal Input Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
Operating Voltage 9 – 16 VDC
Max. Current Draw (13.8V Sinewave) 121 A
Recommended Fuse (not included) 200 A
Physical Specifications
Cooling Convection
Dimensions (H x W x D) 1.9in x 6.8in x 11.3in (4.9 cm x 17.3 cm x 28.5 cm)

Additional information

Weight 6 lbs
Amp Channels

Monoblock

Amp Features

Bass Boost, Clip Indicator, High-Level Inputs, Remote Level Control, Subsonic Filter

Amp Stability

1 Ohm Stable

Amp Remote Control

Included

Amp Class

Class D

Amp Power

Bridgeable

No

Series

Prime