Rockford Fosgate Prime R2-750X1 Monoblock 750 Watts Amplifier

Rockford Fosgate R2-750X1 Prime 750-watt Class D monoblock car amplifier with 1-ohm stability, C.L.E.A.N. setup, Punch EQ, variable bass filtering, high-level inputs, and an included RLC remote level control.

$379.99

4 in stock

Description

The Amp At A Glance:

  • 1-ohm stable power: Delivers 750 watts x 1 at 1 ohm, 500 watts x 1 at 2 ohms, or 250 watts x 1 at 4 ohms.
  • Flexible bass tuning: Continuously variable Punch EQ, a variable infrasonic filter, and fully adjustable 12 dB/octave Butterworth crossovers help tailor subwoofer response to your system.
  • Efficient operation: Class D topology reduces demand on the vehicle’s electrical system while providing strong monoblock output.
  • Convenient level control: The included RLC remote level control lets you adjust bass output from the listening position.
  • Simplified gain setting: Rockford Fosgate C.L.E.A.N. setup circuitry helps you properly adjust input gain.
  • Factory or aftermarket integration: High-level input capability, balanced differential inputs, RCA pass-through outputs, and an Auto-Sense bypass switch support a range of system configurations.
  • Built-in protection: Rollback, short-circuit, and over-current protection help safeguard the amplifier, while the cast-aluminum heat sink manages heat.
  • Responsive power supply: Rockford Fosgate’s P.O.W.E.R. Supply generates more power as voltage increases.

The Rockford Fosgate R2-750X1 gives a subwoofer system the power and control needed for bass that sounds full, defined, and properly integrated with the rest of the music. Its mono output can support several common impedance configurations, making it a flexible choice for factory-audio upgrades or custom aftermarket systems.

Fine-tuning is straightforward with C.L.E.A.N. setup, Punch EQ, adjustable crossovers, and the variable infrasonic filter. Once dialed in, the included remote level control puts bass adjustment within easy reach, so you can match the low-frequency output to the music without returning to the amplifier.

Amplifier Specifications
Amp Channels Monoblock
Amp Power 750 Watts
Amp Class Class D
Bridgeable No
Rated Power (RMS Continuous Power) 250 Watts x 1 @ 4Ohm
500 Watts x 1 @ 2Ohm
750 Watts x 1 @ 1Ohm
Dynamic Power (PVC/PowerCube) 300 Watts x 1 @ 4Ohm
545 Watts x 1 @ 2Ohm
830 Watts x 1 @ 1Ohm
Frequency Response 20 Hz – 250 Hz
Total Harmonic Distortion (THD+Noise) 4Ohm: <1.0%
2Ohm: <1.0%
1Ohm: <1.0%
Input Sensitivity Low-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V
Controls
Crossover Controls Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth
Infrasonic: 15 Hz – 40 Hz @ 12dB/Octave Butterworth
Tone Controls 0 to +18 dB @ 45 Hz
Remote Controls Yes
Amp Remote Control Included
Electrical & Connections
Power Input Connector Compression Terminal Block
Power Wire Gauge 4 AWG
Speaker Output Connector Compression Terminal Block
Speaker Wire Gauge 8 AWG
Signal Input Low-Level: 2 RCA
High-Level: 4-Pin Molex
Operating Voltage 9 – 16 VDC
Max. Current Draw (13.8V Sinewave) 71 A
Recommended Fuse (not included) 120 A
Physical Specifications
Cooling Convection
Dimensions (H x W x D) 1.9in x 6.8in x 10.1in
(4.9 cm x 17.3 cm x 25.5 cm)
Additional Specifications
Signal Output Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Additional information

Amp Channels

Monoblock

Amp Class

Class D

Amp Features

1 Ohm Stable

Amp Power

Amp Remote Control

Included

Series

Prime

Amp Stability

1 Ohm Stable