Rockford Fosgate Prime R2-500X1 Monoblock 500 Watts Amplifier

The Rockford Fosgate R2-500X1 is a 2 Ohm stable, 500 Watts monoblock amplifier with efficient Class D topology, C.L.E.A.N. setup circuitry, Punch EQ, and an included remote level control.

$309.99

37 in stock

Description

The Amp At A Glance:

  • Strong monoblock output: Delivers 300 Watts x 1 at 4 Ohm or 500 Watts x 1 at 2 Ohm.
  • Efficient Class D operation: Reduces demand on the vehicle’s electrical system while supplying dependable subwoofer power.
  • Simplified gain adjustment: C.L.E.A.N. setup circuitry helps you dial in the amplifier’s gain settings.
  • Flexible bass tuning: A variable infrasonic filter, continuously variable Punch EQ, and fully adjustable 12 dB per octave Butterworth crossovers provide control over the sound.
  • Up to 3X the bass: Integrated Punch EQ helps correct acoustic deficiencies and increase bass impact.
  • Control from the driver’s seat: The included RLC remote level control lets you adjust bass output to suit the music.
  • Factory or aftermarket integration: High-level input capability, balanced differential inputs, RCA pass-through outputs, and an Auto-Sense bypass switch support a range of system configurations.

The R2-500X1 gives a subwoofer the focused power it needs to bring weight and definition to the low end. Its monoblock design keeps bass output strong and controlled, helping drums hit with authority while lower notes remain clear.

Built-in setup and tuning tools make it easier to match the amplifier to the system and listening preference. From gain adjustment to filtering and on-the-fly level changes, the R2-500X1 puts practical control over bass response within easy reach.

Amplifier Specifications
Amp Channels Monoblock
Amp Power 500 Watts
Amp Class Class D
Amp Stability 2 Ohm Stable
Bridgeable No
Crossover Controls Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
15 Hz – 40 Hz @ 12dB/Octave Butterworth
Tone Controls 0 to +18 dB @ 45 Hz
Amp Remote Control Included
Rated Power (RMS Continuous Power) 300 Watts x 1 @ 4Ohm
500 Watts x 1 @ 2Ohm
Dynamic Power (PVC/PowerCube) 350 Watts x 1 @ 4Ohm
590 Watts x 1 @ 2Ohm
Frequency Response 20 Hz – 250 Hz
Total Harmonic Distortion (THD+Noise) 4Ohm: <1.0%
2Ohm: <1.0%
Input Sensitivity Low-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V
Electrical & Connections
Power Input Connector Compression Terminal Block
Power Wire Gauge 4 AWG
Speaker Output Connector Compression Terminal Block
Speaker Wire Gauge 8 AWG
Signal Input Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
Operating Voltage 9 – 16 VDC
Max. Current Draw (13.8V Sinewave) 52 A
Recommended Fuse (not included) 80 A
Physical Specifications
Cooling Convection
Dimensions (H x W x D) 1.9in x 6.8in x 8.5in (4.9 cm x 17.3 cm x 21.5 cm)

Additional information

Weight 5 lbs
Amp Channels

Monoblock

Amp Features

Bass Boost, Clip Indicator, High-Level Inputs, Remote Level Control, Subsonic Filter

Amp Stability

2 Ohm Stable

Amp Remote Control

Included

Amp Class

Class D

Amp Power

Bridgeable

No

Series

Prime