The Rockford Fosgate Punch P1000X5 is a 1,000-watt, 5-channel amplifier designed to power front and rear speakers plus a dedicated subwoofer from one chassis. Its 1 Ohm-stable design, C.L.E.A.N. setup features, and efficient operation provide a flexible foundation for a complete car audio system.
$689.99
2 in stock
The Punch P1000X5 gives an entire system a strong, unified source of power. Its separate front, rear, and subwoofer channels keep the full range of the music controlled, allowing vocals and instruments to remain clear while the dedicated fifth channel handles low-frequency impact.
Built-in setup and tuning tools make it easier to balance output throughout the vehicle. Whether adjusting the crossover points, shaping bass response with Punch EQ, or controlling subwoofer level with the optional remote, the P1000X5 provides the control needed to dial in a cohesive listening experience.
| Amplifier Specifications | |
|---|---|
| Amp Channels | 5 Channel |
| Amp Power | 1000/5 Watts |
| Amp Class | Class A/B + Class BD (Sub) |
| Amp Stability | 1 Ohm Stable |
| Bridgeable | Yes (front/rear channels) |
| Crossover Controls | Front: 50Hz – 250Hz High-Pass @ 12dB/Octave Rear: 50Hz – 250Hz High-Pass @ 12dB/Octave Sub: 50Hz – 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave |
| Tone Controls | Sub: 0dB to +18dB @ 45Hz |
| Amp Remote Control | Optional |
| Rated Power (RMS Continuous Power) | 75 Watts x 4 + 150 Watts x 1 @ 4Ohm 125 Watts x 4 + 300 Watts x 1 @ 2Ohm 500 Watts x 1 @ 1Ohm 250 Watts x 2 @ 4Ohm Bridged |
| Dynamic Power (PVC/PowerCube) | 115 Watts x 4 + 299 Watts x 1 @ 4Ohm 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2Ohm 0° Res 863 Watts x 1 @ 1Ohm 0° Res 380 Watts x 2 @ 4Ohm Bridged 0° Res |
| Frequency Response (Hz) | Front/Rear: 20Hz – 20kHz +/-3dB Sub: 20Hz – 500Hz +/-3dB |
| Total Harmonic Distortion (THD+Noise) | <1.0% |
| Input Sensitivity | 150 mV – 12 V |
| Efficiency (average) | Front/Rear: 66% @ 4Ohm Sub Channel: 80% @ 4Ohm |
| Electrical & Connections | |
|---|---|
| Power Input Connector | Block |
| Power Wire Gauge | 4 AWG |
| Speaker Output Connector | Block |
| Speaker Wire Gauge | 12 AWG |
| Signal Input | Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch |
| Operating Voltage | 9 – 16 VDC |
| Max. Current Draw (13.8V Sinewave) | 150 A |
| Average Current Draw (13.8V Music) | 75 A |
| Recommended Fuse (not included) | 150 A |
| Suggested Alternator | 100 A |
| Physical Specifications | |
|---|---|
| Cooling | Convection |
| Dimensions (H x W x D) | 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
| Shipping Weight | 15.3 Lbs. (6.93 Kg.) |
| Weight | 16 lbs |
|---|---|
| Dimensions | 15.03 × 7.76 × 2.38 in |
| Amp Channels | 5 Channel |
| Amp Features | Auto Turn-On, Bass Boost, Clip Indicator, High-Level Inputs, Subsonic Filter |
| Amp Power | |
| Amp Remote Control | Optional |
| Amp Stability | 1 Ohm Stable |
| Bridgeable | Yes |
| Series | Punch |
| Amp Class | Class A/B |