Rockford Fosgate Punch P1000X5 5 Channel 1000/5 Watts Amplifier

The Rockford Fosgate Punch P1000X5 is a 1,000-watt, 5-channel amplifier designed to power front and rear speakers plus a dedicated subwoofer from one chassis. Its 1 Ohm-stable design, C.L.E.A.N. setup features, and efficient operation provide a flexible foundation for a complete car audio system.

$689.99

2 in stock

Description

The Amp At A Glance:

  • 1 Ohm-stable power: The fifth channel supports a 1 Ohm subwoofer load and delivers 500 Watts RMS at 1 Ohm.
  • Complete-system flexibility: Five channels can power front speakers, rear speakers, and a dedicated subwoofer from a single amplifier.
  • Flexible tuning: C.L.E.A.N. setup, a 12 dB/octave Butterworth crossover, an infrasonic filter, and onboard Punch EQ with up to +18 dB boost at 45 Hz help tailor the system.
  • Efficient operation: Class A/B front and rear channels combine with a Class BD subwoofer channel to deliver full-system power without excessive demand on the charging system.
  • Remote-level ready: Compatible with the optional Punch Level Control PLC2, including an input clip indicator.
  • Convenient integration: High-level input capability with an Auto Turn-On circuit and a 2/4-channel input switch support a range of system configurations.
  • Protected performance: Tri-stage protection covers thermal, over-current, and short-circuit conditions, while muted turn-on helps keep startup quiet.
  • Clean installation: A stealth top-mounted control panel and cast aluminum heatsink provide a tidy, durable design.

The Punch P1000X5 gives an entire system a strong, unified source of power. Its separate front, rear, and subwoofer channels keep the full range of the music controlled, allowing vocals and instruments to remain clear while the dedicated fifth channel handles low-frequency impact.

Built-in setup and tuning tools make it easier to balance output throughout the vehicle. Whether adjusting the crossover points, shaping bass response with Punch EQ, or controlling subwoofer level with the optional remote, the P1000X5 provides the control needed to dial in a cohesive listening experience.

Amplifier Specifications
Amp Channels 5 Channel
Amp Power 1000/5 Watts
Amp Class Class A/B + Class BD (Sub)
Amp Stability 1 Ohm Stable
Bridgeable Yes (front/rear channels)
Crossover Controls Front: 50Hz – 250Hz High-Pass @ 12dB/Octave
Rear: 50Hz – 250Hz High-Pass @ 12dB/Octave
Sub: 50Hz – 250Hz Low-Pass
Sub: 28Hz infrasonic filter @ 12dB/Octave
Tone Controls Sub:
0dB to +18dB @ 45Hz
Amp Remote Control Optional
Rated Power (RMS Continuous Power) 75 Watts x 4 + 150 Watts x 1 @ 4Ohm
125 Watts x 4 + 300 Watts x 1 @ 2Ohm
500 Watts x 1 @ 1Ohm
250 Watts x 2 @ 4Ohm Bridged
Dynamic Power (PVC/PowerCube) 115 Watts x 4 + 299 Watts x 1 @ 4Ohm 0° Res
190 Watts x 4 + 540 Watts x 1 @ 2Ohm 0° Res
863 Watts x 1 @ 1Ohm 0° Res
380 Watts x 2 @ 4Ohm Bridged 0° Res
Frequency Response (Hz) Front/Rear: 20Hz – 20kHz +/-3dB
Sub: 20Hz – 500Hz +/-3dB
Total Harmonic Distortion (THD+Noise) <1.0%
Input Sensitivity 150 mV – 12 V
Efficiency (average) Front/Rear: 66% @ 4Ohm
Sub Channel: 80% @ 4Ohm
Electrical & Connections
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Block
Speaker Wire Gauge 12 AWG
Signal Input Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 3 RCA Pair
Sub: front/sub input switch
Operating Voltage 9 – 16 VDC
Max. Current Draw (13.8V Sinewave) 150 A
Average Current Draw (13.8V Music) 75 A
Recommended Fuse (not included) 150 A
Suggested Alternator 100 A
Physical Specifications
Cooling Convection
Dimensions (H x W x D) 2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)
Shipping Weight 15.3 Lbs. (6.93 Kg.)

Additional information

Weight 16 lbs
Dimensions 15.03 × 7.76 × 2.38 in
Amp Channels

5 Channel

Amp Features

Auto Turn-On, Bass Boost, Clip Indicator, High-Level Inputs, Subsonic Filter

Amp Power

Amp Remote Control

Optional

Amp Stability

1 Ohm Stable

Bridgeable

Yes

Series

Punch

Amp Class

Class A/B